Open Source C Hardware Platforms
Sort By:
C Hardware Platforms
View 172 business solutionsBrowse free open source C Hardware Platforms and projects below. Use the toggles on the left to filter open source C Hardware Platforms by OS, license, language, programming language, and project status.
-
DataImpulse - Ethical Provider of Residential, Mobile, and Data Center IPsDataImpulse (dataimpulse.com) is a proxy provider offering a pool of over 90 million ethically sourced residential, mobile, and data center IP addresses from 195 countries. Pricing for residential proxies starts at $1 per GB with a pay-as-you-go model; there are no subscriptions or traffic expiration dates.
-
Unimus makes Network Automation and Configuration Management easy.We aim to make automation, disaster recovery, change management and configuration auditing painless and affordable for a network of any size.
-
1
S.M.A.R.T. Monitoring Tools
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. -
2
-
3
Asuswrt-Merlin
Alternative firmware for Asus wireless routers
Asuswrt-Merlin is a third party firmware for select Asus wireless routers. Based on the Asuswrt firmware developed by Asus, it brings tweaks, new features and other improvements to the original firmware, while retaining its performance and ease of use. Note that only downloads are hosted on SF.net - the complete source code can be found on https://github.com/RMerl/asuswrt-merlin (legacy 380.xx) and https://github.com/RMerl/asuswrt-merlin.ng (382 and newer releases). -
4
This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick, keyboard-to-joystick). If you are a beginner in device drivers you can take this code and enhance it to support more (or less) axes, buttons or POVs.
-
Project Planning and Management Software | PlanviewPlanview® Portfolios enables enterprises to accelerate strategic execution by seamlessly integrating business and technology planning, optimizing resources, and leveraging the power of embedded AI — Planview Anvi™ — to deliver breakthrough products, services, and customer experiences. This unified approach aligns strategy with execution, driving enhanced business performance across the organization.
-
5
Barrier
Open-source KVM software
Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. Barrier was built to be simple and reliable, allowing you to control a different machine by simply using your mouse and keyboard from another. It works on all major operating systems (Linux, Windows, MacOS/OS X), including FreeBSD and OpenBSD. -
6
Project's goal is to create better tools for diagnosing Linux systems. Diagnostics include first failure data capture, error log analysis, preventative testing, and system inventory gathering. You can now find Power System specific packages on github. libservicelog : https://github.com/power-ras/libservicelog servicelog : https://github.com/power-ras/servicelog lsvpd : https://github.com/power-ras/lsvpd libvpd : https://github.com/power-ras/libvpd ppc64-diag : https://github.com/power-ras/ppc64-diag sysfsutils is moved to github. New home for sysfsutils : https://github.com/linux-ras/sysfsutils
-
7
HP Linux Imaging and Printing
Hewlett-Packard's Linux imaging and printing software
The Hewlett-Packard Linux Imaging and Printing Project provides a unified single and multi-function connectivity solution for Linux. For support and help, please visit https://launchpad.net/hplip -
8
Linux ATM Drivers for the Geos Multiport ADSL2+ router, Solos PCI Multiport ADSL2+ modem and Pulsar PCI ADSL Card
-
9
libusb
A cross-platform library that gives apps easy access to USB devices
Library to enable user space application programs to communicate with USB devices -
Peer to Peer Recognition Brings Teams TogetherCreate a positive and energetic workplace environment with Motivosity, an innovative employee recognition and engagement platform. With Motivosity, employees can give each other small monetary bonuses for doing great things, promoting trust, collaboration, and appreciation in the workplace. The software solution comes with features such as an open-currency open-reward system, insights and analytics, dynamic organization chart, award programs, milestones, and more.
-
10
A very high quality package of printer drivers for CUPS on Linux and other POSIX-compliant operating systems. This project also maintains an enhanced Print plug-in for GIMP 2.x from the same code base.
-
11
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more! Run the configurator on any device, whether it is using Windows, MacOS, Linux, or Android. With the Betaflight OSD you can get all relevant flight metrics directly into your FPV video feed. An easy-to-use drag-and-drop configuration allows the placement of values like used mAh and LiPo Voltage readings. Additionally, you can change most firmware settings using stick commands without even removing your goggles. -
12
Linux driver for the ZyDAS ZD1211(b) 802.11a/b/g USB WLAN chip. There is the community zd1211 driver (based on the ZyDAS GPL driver) and the rewritten zd1211rw driver (included in Linux 2.6.18-rc1 and newer).
-
13
I/O performance Analysis Tool
-
14
OpenOCD - Open On-Chip Debugger
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets. -
15
IPMI Management Utilities
Manage and interpret IPMI systems with common a software tool
ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments. -
16
Formerly Intel Ethernet Drivers
Moved to github.com/intel
Notice! Effective August 16, 2024, Intel will no longer use Sourceforge to distribute software for Ethernet products. ==================== Please refer to our GitHub location for future software updates here: https://intel.github.io/ethernet-linux/ -
17
libusbK
A complete software solution for windows usb devices
libusbK is a complete driver/library solution for vendor class usb device interfaces. If you are a usb developer or usb device manufacturer seeking a driver solution for a new USB widget then libusbK could be for you. libusbK encompasses a 100% WinUSB compatible api/funtion set. All WinUSB power/pipe polices are fully supported by the libusbK driver. In Addition, libusbK has full support for isochronous endpoints and an extensive set of additional modules to simplify development. Source code repository using github: https://github.com/mcuee/libusbk -
18
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
19
setserial is a program designed to set and/or report the configuration information associated with a serial port.
-
20
Tasmota
Alternative firmware for ESP8266 with easy configuration
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits unexpected behaviour for your device and configuration, you should upgrade to the latest development version instead to see if your problem is resolved as some bugs in previous releases or development builds may already have been resolved. Single binary firmware. Support for TuyaMCU. Increase PWM channels to 16. Initial support for ESP32S3 with support for 38 configurable GPIOs. -
21
# OBSOLETE The project has moved to CodeBerg at https://codeberg.org/IPMITool/ipmitool IPMItool provides a simple command-line interface to IPMI-enabled devices through an IPMIv1.5 or IPMIv2.0 LAN interface or Linux/Solaris kernel driver.
-
22
Display power off utility. Powers off desktop/notebook display and optionally locks workstation. Can be set as a screensaver. Can be launched as a system tray icon application.
-
23
libusb
A cross-platform library to access USB devices
libusb is a library for USB device access from Linux, macOS, Windows, OpenBSD/NetBSD, Haiku and Solaris userspace. It is written in C (Haiku backend in C++) and licensed under the GNU Lesser General Public License version 2.1 or, at your option, any later version. libusb is a C library that provides generic access to USB devices. It is intended to be used by developers to facilitate the production of applications that communicate with USB hardware. Using a single cross-platform API, it provides access to USB devices on Linux, macOS, Windows, etc. No special privilege or elevation is required for the application to communicate with a device. All versions of the USB protocol, from 1.0 to 3.1 (latest), are supported. libusb is abstracted internally in such a way that it can hopefully be ported to other operating systems. -
24
The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.
-
25
IIDC Camera Control Library
Capture and control API for IIDC compliant cameras
libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. Keywords: ieee1394, IIDC, DCAM, firewire, USB, machine vision, computer vision, video capture, library
